Co-Extrusion WPC Fencing Board, Eco-Friendly, 1760 × 161 × 20mm – Teak B

Co-Extrusion WPC Fencing Board, Eco-Friendly, 1760 × 161 × 20mm – Teak B

FEN12

£53.42 /m²

Pack Price:

OR
? Help Measuring?
Details

A single composite fencing board with the warm, natural look of teak — and none of the upkeep.

This is a single co-extrusion WPC fencing board in Teak B. It gives you the rich, warm tone of natural hardwood fencing without the annual oiling, treating, and inevitable deterioration that comes with real timber. Sold individually so you order exactly the quantity your project needs.

What Makes This a Co-Extrusion Board

Standard WPC boards blend wood fibre and plastic together with no surface protection. Co-extrusion goes a step further — a tough polymer shell is bonded around the composite core on all sides during manufacturing. That outer layer is what keeps the colour stable under UV exposure, prevents moisture getting into the board, and resists surface scratching over years of outdoor use. The performance gap between co-extrusion and standard WPC widens significantly over time.

The Teak Finish

Teak is a classic choice for garden fencing — warm, rich, and versatile enough to suit both traditional and contemporary outdoor schemes. It sits naturally alongside natural stone paving, warm brick, timber garden furniture, and established planting. If your garden leans towards earthy, natural tones rather than cool modern greys, a teak board delivers that warmth without requiring a single drop of wood oil.

Where to Use It

Garden privacy fencing, patio boundary screens, driveway borders, pool surrounds, and commercial outdoor enclosures. Works well in gardens with natural stone, warm brick, timber decking, or heavy planting where cooler grey tones would feel out of place.

Low Maintenance

No oiling, painting, treating, or sealing at any point. Unlike real hardwood fencing which greys and rots without annual treatment, this board handles UK weather on its own. A periodic rinse with a hose is all it needs to stay clean.

Important: This listing is for a single board. Posts, rails, and fixings are sold separately. Order all boards in one batch to ensure colour consistency across your project.

Key Features
  • 2nd Generation Co-Extrusion WPC Polymer shell fused to the composite core for superior UV resistance, colour retention, and moisture protection versus standard WPC boards.
  • Teak Finish Warm natural timber tone that suits both traditional and contemporary garden schemes.
  • Tongue & Groove Profile Boards interlock cleanly without visible fixings for a tight, seamless fence face.
  • 100% Weatherproof Fully waterproof, rot-proof, and fire resistant. Will not warp, crack, swell, or splinter in UK conditions.
  • UV Resistant Co-extrusion outer layer actively prevents colour fade and surface degradation from sun exposure.
  • Zero Maintenance No painting, oiling, or treating required — unlike real timber fencing.
  • Eco-Friendly Made from recycled wood fibre and plastic composite — a sustainable, long-life alternative to virgin hardwood.
Installation Guide

Tools Required
Tape measure, pencil, hand saw or circular saw, drill, spirit level, rubber mallet.

Step 1 – Plan Your Layout
Measure your fencing run. Each board has an effective width of 151.6mm. A standard 1.8m high bay needs 12 boards. Order all boards in one batch to ensure colour consistency.

Step 2 – Set Posts and Rails
Install posts no more than 1800mm apart, set in concrete and fully cured. Fix the bottom rail first and confirm it is level.

Step 3 – Insert the First Board
Slide the first board into the bottom rail channel and check it is vertical with a spirit level.

Step 4 – Stack Remaining Boards
Slot each board into the groove of the one below. Press firmly together — use a rubber mallet and offcut block to protect the surface. Boards should connect cleanly without forcing.

Step 5 – Fix the Top Rail
Secure the top rail once all boards are in place to lock the stack.

Step 6 – Final Check and Trimming
Check the full run is level and plumb. Trim boards to width at end posts if needed using a circular saw.

Important Notes

  • Leave a 5mm expansion gap at each end of the run for temperature movement.
  • Keep boards at least 50mm clear of soil level.
  • Boards may lighten slightly over the first 3–6 months of UV exposure before reaching their permanent tone. This is normal for all WPC products.

Shipping and Delivery


Experience the convenience of swift order fulfillment with our top-notch shipping services.

Dimension

1760 x 161 x 20mm, Effective Width: 161.2mm / 151.6mm, Weight: 3.46 kg per board

Share
UK Stocked & Ready
Dispatched from our Luton warehouse. Fast, reliable delivery to your door.
Expert UK Support
Real advice from our UK team — from order through to installation.
Easy DIY Install
Engineered for straightforward installation. Professional finish, no complex tools.