Co-Extrusion WPC Fencing Board, Tongue & Groove, 1800 × 156 × 20mm - Light Grey

FEN11

£53.42 /m²

Pack Price:

OR
? Help Measuring?
Details

A single composite fencing board in light grey — weatherproof, low maintenance, and built to last.

This is a single co-extrusion WPC fencing board in Light Grey with a Waterflow Grain surface texture. Sold individually so you can order the exact quantity your project requires.

What Makes This a Co-Extrusion Board

Standard WPC boards blend wood fibre and plastic with no surface protection. Co-extrusion adds a protective polymer shell fused around the composite core on all sides during manufacturing. That outer layer locks in the colour, blocks moisture, and resists scratching and surface wear far better than first-generation WPC — meaning the board performs and looks better for significantly longer.

The Light Grey Finish

Light Grey is the most versatile fence colour for UK gardens. It sits naturally against brick, render, stone, and timber without clashing with any of them. Neutral enough to complement any garden scheme, contemporary enough to suit modern landscaping. The Waterflow Grain texture adds a fine linear detail across the surface that keeps the finish looking refined rather than flat or plastic.

Where to Use It

Garden privacy fencing, patio screens, driveway boundaries, pool surrounds, and commercial outdoor enclosures. Light Grey pairs well with anthracite window frames, grey paving slabs, white or grey render, and modern garden furniture — one of the most popular choices for contemporary UK garden projects.

Low Maintenance

No painting, treating, or sealing — ever. The co-extrusion surface resists mould, moisture, and UV fading year-round. A periodic rinse with a hose or wipe with a soft brush is all it needs.

Important: This listing is for a single board. Posts, rails, and fixings are sold separately. Order all boards in one batch to ensure colour consistency across your project.

Key Features
  • 2nd Generation Co-Extrusion WPC Polymer shell fused to the composite core for superior UV resistance, colour retention, and moisture protection versus standard WPC boards.
  • Light Grey Waterflow Grain Finish Clean, contemporary neutral with a subtle linear grain texture. Looks refined from both sides.
  • Tongue & Groove Profile Boards interlock cleanly without visible fixings for a tight, seamless fence face.
  • 100% Weatherproof Fully waterproof, rot-proof, and fire resistant. Will not warp, crack, swell, or splinter in UK conditions.
  • UV Resistant Co-extrusion outer layer actively prevents colour fade and surface degradation from sun exposure.
  • Zero Maintenance No painting, staining, or treating required at any point.
  • Eco-Friendly Made from recycled wood fibre and plastic composite — a sustainable, long-life alternative to virgin timber fencing.
Installation Guide

Tools Required
Tape measure, pencil, hand saw or circular saw, drill, spirit level, rubber mallet.

Step 1 – Plan Your Layout
Measure your fencing run. Each board has an effective width of 151.6mm. A standard 1.8m high bay needs 12 boards. Order all boards in one batch to ensure colour consistency.

Step 2 – Set Posts and Rails
Install posts no more than 1800mm apart, set in concrete and fully cured. Fix the bottom rail first and confirm it is level.

Step 3 – Insert the First Board
Slide the first board into the bottom rail channel and check it is vertical with a spirit level.

Step 4 – Stack Remaining Boards
Slot each board into the groove of the one below. Press firmly together — use a rubber mallet and offcut block to protect the surface. Boards should connect cleanly without forcing.

Step 5 – Fix the Top Rail
Secure the top rail once all boards are in place to lock the stack.

Step 6 – Final Check and Trimming
Check the full run is level and plumb. Trim boards to width at end posts if needed using a circular saw.

Important Notes

  • Leave a 5mm expansion gap at each end of the run for temperature movement.
  • Keep boards at least 50mm clear of soil level.
  • Boards may lighten slightly over the first 3–6 months of UV exposure before reaching their permanent tone. This is normal for all WPC products.

Shipping and Delivery


Experience the convenience of swift order fulfillment with our top-notch shipping services.

Dimension

1800 x 156 x 20mm Weight: 3.46 kg per board

Share
UK Stocked & Ready
Dispatched from our Luton warehouse. Fast, reliable delivery to your door.
Expert UK Support
Real advice from our UK team — from order through to installation.
Easy DIY Install
Engineered for straightforward installation. Professional finish, no complex tools.